🛠️ How to Fix a Glasses Arm That Snapped Off: Quick DIY Repair Guide

A broken glasses arm can feel like a disaster, especially if it’s your favourite pair. But don’t panic — most broken arms can be repaired at home with a few simple tools, some patience, and a SnapitScrew Eyeglass Repair Kit. Whether your hinge snapped, the arm broke in the middle, or a screw fell out, this guide walks you through step by step to get your glasses back in action.

👓 Why Glasses Arms Break

Glasses arms (also called temples) are under constant stress. Here’s why they sometimes snap:

• Accidental pressure: Dropping glasses or sitting on them.

• Hinge damage: Screws or metal hinges that are loose or worn.

• Material fatigue: Plastic or metal arms weaken over time.

• Improper handling: Removing glasses with one hand or twisting them can stress the frame.

Knowing the cause will help you fix the problem and prevent future damage.

🧰 What You’ll Need for the Repair

Before attempting any repair, gather your tools:

• SnapitScrew Eyeglass Repair Kit – includes precision screwdrivers and replacement screws.

• Snapit Screw Refill Kit – essential if a screw has stripped or fallen out.

• Tweezers or a magnet to handle tiny screws.

• A soft, flat work surface (a towel works well).

• Optional: superglue or epoxy for cracks in plastic frames.

💡 Pro Tip: Snapit screws are designed to be easy to install, with a “snap-off tail” so you don’t need to fiddle with tiny screws for long.

🔧 Step-by-Step Guide: Fixing a Snapped Glasses Arm

Step 1: Assess the Damage

Check where the break occurred:

• Hinge area: This is the most common break point. If the hinge is still attached to the frame, a screw replacement may be all that’s needed.

• Middle of the arm: This is more serious. Plastic arms may need glue, while metal frames may require careful alignment and reinforcement.

• Screw hole stripped or missing: You’ll need a replacement Snapit screw to secure the hinge.

Step 2: Gather Replacement Parts

Select the correct size Snapit screw from your kit. Standard sizes include 1.2, 1.4, 1.5, 1.6, and 1.7 mm. The 1.4 mm screw is most commonly used for standard frames.

For hinge damage, the SnapitScrew Refill Kit ensures you have all the screws you may need, including extra sizes for tricky repairs.

Step 3: Reattach the Arm

For metal frames:

1. Align the hinge with the frame front.

2. Insert the replacement screw through the hinge barrels.

3. Tighten gently with the screwdriver until smooth movement is restored.

4. Snap off the screw tail for a clean finish.

For plastic frames:

1. If the arm cracked near the hinge, gently align it.

2. Apply a small drop of superglue or epoxy to the break.

3. Hold in place until set.

4. Insert a Snapit screw into the hinge hole and tighten carefully.

💡 Tip: Avoid overtightening — too much pressure can crack the plastic or strip threads.

Step 4: Test Your Repair

• Open and close the arm several times to ensure smooth movement.

• Check that the glasses sit evenly on your face and do not wobble.

• Make minor adjustments to the arm angle or hinge if necessary.

If everything moves smoothly and feels secure, the repair is complete.

⚙️ Preventing Future Breaks

Once repaired, you’ll want to keep your glasses strong for the long term:

1. Handle with care: Always use both hands to remove glasses.

2. Store in a case: Avoid leaving glasses loose on surfaces or in pockets.

3. Check screws monthly: Tighten any that have loosened over time.

4. Keep spare screws handy: The SnapitScrew Refill Kit is perfect for this.

5. Avoid extreme pressure: Don’t twist or bend arms beyond their natural movement.

🧠 Extra Tips for DIY Repairs

• Use a tweezer or magnetic screwdriver for tiny screws to make the job easier.

• If a plastic arm is severely broken in the middle, consider replacing it instead of attempting a full glue repair.

• Keep a repair kit in your bag when travelling — accidents happen, and a small kit can save a trip to the optician.

🏁 Final Thoughts

A broken glasses arm doesn’t mean your favourite frames are lost forever. With the right tools, a steady hand, and a SnapitScrew kit, most breaks can be fixed quickly and effectively.

From metal hinges to plastic arms, this DIY repair guide gives you the confidence to restore your glasses to full functionality — often in less than 10 minutes. Keep a refill kit on hand, check your screws regularly, and your glasses can last for years to come.

#FixBrokenGlasses #GlassesRepair #DIYGlasses #SnapitScrew #EyeglassRepairKit #GlassesArmRepair #RefillKit